KBB Fire Valve 6.0m 65 degrees celcius

KBB Fire Valve 6.0m 65 degrees celcius (°C)
The robust non-electric design has been proven for more than 40 years and carries full OFTEC approval as well as BS 5410 Part 1 conformance. It consists of a sealed sensor phial which should be mounted inside the appliance above the burner, and a thermally-operated valve installed outside the building in the oil supply pipeline and linked to the sensor by capillary tubing.

If triggered by excessive heat, the valve will snap closed.
It can then be reset manually by pushing the reset button in. This ability to trip and reset the valve enables testing to be carried out at regular intervals to ensure that it is functioning correctly.

If required, the valve can be closed manually to shut off the oil flow by pulling out the reset button.

Accepts 1/4 inch male BSP fittings. Note: It is recommended to use pipe support sleeves when using compression fittings on oil lines.